HP Blade bc2000 страница 70 Скачать руководство пользователя

Страница: 70 / 147

User Permission Change

One of the following has occurred:

●

A user has been added, removed, or modified.

●

A user’s group membership has been modified.

The blade PC bay membership has been changed for a group
with at least one user.

Enclosure Event Messages

Enclosure Shutdown

The enclosure is being shut down

Enclosure Status Change

The Integrated Administrator detected a change in status due
to a change in the state of one or more hardware components
or blade PC readings.

Fan Inserted

A fan has been inserted.

Fan Removed

A fan has been removed.

Fan Status Change

The status of fan has changed.

Power Supply Inserted

A power supply has been inserted.

Power Supply Overload

The power system is overloaded. Check each power supply
status to determine cause.

Power Supply Redundancy Change

The power supplies are now either redundant or no longer
redundant.

Power Supply Removed

A power supply has been removed.

Power Supply Status Change

The status of a power supply has changed.

Restart Event

The Integrated Administrator is about to restart.

Thermal Status Change

The state of a thermal sensor has changed.

Bay Event Messages

Bay Event

A blade PC bay has been assigned or unassigned from a
group.

Blade Inserted

A blade PC was inserted into the enclosure.

Blade Removed

A blade was removed from the enclosure.

Blade Status Change

Health driver detected a change in status due to a change in
the state of one or more hardware components or blade PC
readings.

Table 5-7

Command Line Event Messages (continued)

Chapter 5 Command Line Interface

ENWW

Содержание Blade bc2000




















































































































































Результаты поиска

Содержание Blade bc2000

Отзывы:

Похожие инструкции для Blade bc2000

Бренды по названию

Популярные бренды

HP Blade bc2000, Руководство пользователя

Результаты поиска

Содержание Blade bc2000

Отзывы:

Похожие инструкции для Blade bc2000

Бренды по названию

Популярные бренды