4.
Click
View/Modify Group
.
5.
Select the appropriate check boxes for the available blade PC bays that reflects the updated rights
you wish to give the group.
6.
Click
Apply
.
To modify rights to blade PC bays for an existing group using the CLI, choose from among the following
commands:
NOTE:
Only enclosure administrators may execute these commands.
●
To expand the number of blade PCs assigned to a group, type:
ASSIGN BAY [ALL | <bay number> {[ , | - ]<bay number>}] <group name>
If a blade PC bay is currently assigned to a group, this command re-assigns the bay from its current
group to the new group.
●
To remove access rights to blade PC bays for any group, type:
UNASSIGN BAY [ALL | <bay number> {[ , | - ] <bay number>}]
Disabling and Deleting User Accounts
NOTE:
Only enclosure administrators may execute this command. Group accounts can be deleted,
but cannot be disabled.
To disable a user account using the Web-based user interface:
1.
Click the
Administration
tab.
2.
Click on
User List
in the left panel.
3.
Select the user whose account you wish to disable from the user list.
104 Chapter 7 Performing Common Administrative Tasks
ENWW
