DOWNLOAD SSHKEY
Downloads an authorized key file to use with Secure Shell v2,
which can contain the public keys for any enclosure
administrator. Supported protocols are http, ftp, and tftp.
Format the URL as
protocol//host/path/file
. If your ftp server
does not support anonymous connections, you can specify a
username and password by replacing the host part in the
previous format with username:password@host.
Only enclosure administrators
may execute this command.
GENERATE CERTIFICATE
REQUEST
Generates a PKCS#10 certificate request.
Only enclosure administrators
may execute this command.
GENERATE CERTIFICATE
SELFSIGNED
Generates a self-signed certificate.
Only enclosure administrators
may execute this command.
PING
{<number>}
{<IP address>} | <server
name>}
Sends ICMP echo messages to a remote IP device.
If <number> is omitted, only 5 packets are sent. Packets are
sent out at 1-second intervals.
The <IP address> must be in
the form “###.###.###.###”
where ### ranges from 0 to
255.
SET DISPLAY EVENTS
[ ON | OFF ]
Turns event notification on or off. The Integrated Administrator
preservers this setting across all logins.
None
SET EXPERT {MODE}
[ ON | OFF ]
Turns EXPERT MODE on or off. When EXPERT MODE is on,
the system will not prompt the user to confirm actions. Users
should exercise caution when working in EXPERT MODE as
many actions are not reversible.
None
SET FACTORY
Sets the Integrated Administrator back to its factory defaults.
The Administrator account password does not change. The
Integrated Administrator is restarted after all the changes are
made.
Note: This command removes all groups, users, and other
customization from the memory of the enclosure, and the
information is unrecoverable.
Only the “Administrator”
account may execute this
account.
SET SCRIPT MODE
[ ON | OFF ]
When SCRIPT MODE is on, the following commands require
a password argument: ADD USER, SET USER PASSWORD,
or SET PASSWORD.
Default values require user interaction.
None
SHOW SESSIONS
Displays the connection to each bay and switch if one exists.
Only one user may connect to each bay and switch at a time.
It also shows each user that is currently logged in, the user’s
port number, connect time, and remote system name.
Users may not run this
command. Group members
and group administrators may
only see the sessions for bays
assigned to groups to which
they belong. Enclosure
administrators see all sessions
SHOW SSHFINGER PRINT
Displays the key fingerprint of the host SSH pubic key of the
Integrated Administrator. This can be used from the serial
console to validate the identity of the Integrated Administrator
before initializing an SSH connection across a network.
None
SHOW SSHKEY
Displays the contents of the existing Secure Shell authorized
keys file that is being used for enclosure administrator key-
based authentication.
Only enclosure administrators
may execute this command.
SHOW ENCLOSURE
POWER
Display power consumption estimates for the enclosure,
including all sub-components. This information includes
overall power consumption of the enclosure, as well as peak
and average supply input and output power.
This command provides only
estimated power usage. Use it
only as reference information.
Table 5-2
General Management Commands (continued)
ENWW
Operating the Command Line Interface
51
