HP Apollo 9000 400dl, Руководство по обслуживанию

Страница: 271 / 296

Configuring the EEPROM C-19
C.4.5 RS-232 Configuration
From the Configurable Interfaces menu, type the command key for the RS-232 inter-
face menu and the following RS-232 menu appears:
RS-232
Key Feature Value
---------------------------
1 Select Code 9
2 Interrupt Level 3
3 Remote/Local L
4 Modem Enable Y
X to exit menu
---------------------------
Type [key] RETURN ?
Each feature is explained in the following subsections.
RS-232 Select Code
From the RS-232 menu, type the command 1 and the prompt line changes to
1 Select Code 9
used select codes are :
12 14 15 21
Type 0.. 31 except used RETURN ?
The select code function line appears as it does in the main part of the RS-232 menu.
The current select code appears at the right. Select codes already used in your system
unit are not available and are listed in the third line.
The prompt line is at the bottom, you’ll see the prompt line. Enter any select code be-
tween 0 and 31, except for select codes already used for other interfaces. If you want to
use select code 20, you would enter the command 20 . Then the RS-232 menu changes
to:
RS-232
Key Feature Value
---------------------------
1 Select Code 20
2 Interrupt Level 3
3 Remote/Local L
4 Modem Enable Y
X to exit menu
---------------------------
Type [key] RETURN ?