![background image](http://html.mh-extra.com/html/hp/635n-jetdirect-ipv6-ipsec-print-server/635n-jetdirect-ipv6-ipsec-print-server_administrators-manual_163681094.webp)
information assists HP in improving product features and services. The default setting for this page will
depend on the user's selection on initial access to the Networking tab.
To enable this feature, check the checkbox and click
Apply
.
To disable this feature, clear the checkbox and click
Apply
.
Select Language
This link appears if the HP Jetdirect Web pages support multiple languages. Supported languages may
also be selected through language preference settings in your browser (see your browser's Help).
To display supported non-English languages, the use of cookies must be enabled in your browser
settings.
Security: Settings
In the
SECURITY
section, the
Settings
menu provides access to the following tabs:
Status
(default),
Wizard
,
Restore Defaults
. The available settings depend on your particular print server model.
Status
The
Status
page displays the current security configuration settings of the print server. The settings
that will be displayed depend on the features supported by the print server.
Wizard
NOTE:
If you use HP Web Jetadmin to manage your devices, you should not use this wizard.
Instead, use HP Web Jetadmin to configure your network security settings to ensure they are
properly set for your network.
Select the
Wizard
tab to open the initial
Wizard
page. If prompted with security alerts, click
Yes
to
proceed.
The
Wizard
page identifies the current security level that was last configured on the print server. If a
security level has not been configured, the security level will be
None
. However, if HTTPS is required
for access to the networking pages, then the default setting will indicate
Custom
.
In addition, this page allows you to run the HP Jetdirect Security Configuration Wizard to configure or
change the current security level. This wizard will guide you through the print server's security
configuration settings for your network. Click
Start Wizard
to run the wizard. This opens the
Security
Level
page.
The optional configuration parameters presented by the wizard will depend on your choice of security
level. For an overview, see
Table 4-15 Wizard Security Levels on page 84
.
NOTE:
If you improperly exit the wizard (for example, by failing to use the
Cancel
button), an
Operation Failed
screen may appear. If so, wait approximately two minutes before entering the
wizard again.
Table 4-15
Wizard Security Levels
Security Level
Description
Basic Security
This option requires that you configure an administrator password for configuration
management. The administrator password is shared with other management tools, such
84
Chapter 4 Embedded Web Server (V.36.xx)
ENWW
Содержание 635n - JetDirect IPv6/IPsec Print Server
