![background image](http://html.mh-extra.com/html/hp/635n-jetdirect-ipv6-ipsec-print-server/635n-jetdirect-ipv6-ipsec-print-server_administrators-manual_163681054.webp)
Table 3-3
Telnet Commands and Parameters
Command
Description
User Control Commands
?
Displays the Help and Telnet commands.
/
Displays current values.
menu
Displays the
Menu Interface on page 57
for access to configuration parameters.
advanced
Enables advanced commands. Help (
?
) will include the advanced commands in the list.
general
Disables advanced commands. Help (
?
) will not include advanced commands (default).
save
Save the configuration values and exit the session.
exit
Exit the session.
export
Export the settings to a file for editing, and importing through Telnet or TFTP (this command
is only supported by systems, such as UNIX, that support input/output redirection).
General
passwd
Set the administrator password (shared with the embedded Web server and HP Web
Jetadmin). For example, “
passwd jd1234 jd1234
” sets the password to
jd1234
. Note
that “
jd1234
” is entered twice for confirmation.
Up to 16 alphanumeric characters may be used. When initiating the next Telnet session,
you will be prompted for a user name and this password.
To clear the password, enter the command without password and confirmation entries.
Passwords may be cleared by a cold reset.
sys-location
Alpha-numeric string (up to 255 characters), typically used to identify a location.
sys-contact
Alpha-numeric string (up to 255 characters), typically used to identify the name of a network
or device administrator.
ssl-state
Sets the print server's security level for Web communications:
1
: Forced redirection to the HTTPS port. Only HTTPS (secure HTTP) communications can
be used.
2
: Disable forced redirection to HTTPS. Both HTTP and HTTPS communications can be
used.
security-reset
Reset security settings on the print server to factory default values.
0
(default) does not reset.
1
resets the security settings.
TCP/IP Main
host-name
Alphanumeric string (up to 32 characters), to assign or change the name of the network
device. For example,
“
host-name printer1
” assigns the name “
printer1
” to the device. The default host
name is NPIxxxxxx, where xxxxxx are the last six digits of the LAN hardware (MAC)
address.
44
Chapter 3 TCP/IP Configuration
ENWW
Содержание 635n - JetDirect IPv6/IPsec Print Server
