manualshive.com logo in svg

HP 635n - JetDirect IPv6/IPsec Print Server, Руководство администратора, Страница: 180 / 202

Поделиться
Скачать
HP 635n - JetDirect IPv6/IPsec Print Server Скачать руководство пользователя страница 180

Jetdirect Menus for Graphical Control Panels

Newer printer/MFP devices support graphical control panels, which may consist of a numeric keypad,
navigation buttons and touch-screen displays.

For Jetdirect menus, graphical control panels typically display 18 characters on a line, and as many as
four lines at a time. In addition, scrolling may be supported to allow display of additional lines.

NOTE:

These menus apply to printers/MFPs with a Jetdirect embedded print server, or that

contain a EIO slot in which a Jetdirect EIO print is installed. The menu items displayed depend
on the features supported by the print server.

Figure C-1

  Example of Graphical Control Panel

Table C-1

  Jetdirect EIO Menu on Graphical Control Panel

Menu item

Sub-menu item

Sub-menu item

Values and Description

TCP/IP

Enable

 

Off

: Disable the TCP/IP protocol.

On

 (default): Enable the TCP/IP protocol.

Host Name

 

An alphanumeric string, up to 32 characters, used to
identify the device. This name is listed on the
HP Jetdirect configuration page. The default host name
is NPIxxxxxx, where xxxxxx is the last six digits of the
LAN hardware (MAC) address.

NOTE:

Names, such as host names, must

begin with a letter and can contain only letters,
numbers, periods (for domain names only), or
hyphens. The underline character (_) is not
allowed.

 

IPv4 Settings

Config Method

Specifies the method that TCP/IPv4 parameters will be
configured on the HP Jetdirect print server.

BootP

: Use BootP (Bootstrap Protocol) for automatic

configuration from a BootP server.

DHCP

 (default): Use DHCP (Dynamic Host

Configuration Protocol) for automatic configuration
from a DHCPv4 server. If selected and a DHCP lease
exists, 

DHCP Release

 and 

DHCP Renew

 menus are

available to set DHCP lease options.

Auto IP

: Use automatic link-local IPv4 addressing. An

address in the form 169.254.x.x is assigned
automatically.

Manual

: Use the 

Manual Settings

 menu to configure

TCP/IPv4 parameters.

 

 

DHCP Release

This menu appears if 

Config Method

 was set to

DHCP

 and a DHCP lease for the print server exists.

170 Appendix C   HP Jetdirect Control Panel Menus (V.36.xx)

ENWW

Содержание 635n - JetDirect IPv6/IPsec Print Server











































































































































































































Отзывы:

Нет отзывов