HP 635n - JetDirect IPv6/IPsec Print Server, Руководство администратора, Страница: 46 / 202

status-page-lang:
Specifies the page description language (PDL) that the print server will use to send the Jetdirect configuration/status page
to the printer.
●
Auto
(default): The PDL is auto-detected when the print server is powered on or after a cold-reset.
●
PCL
: Hewlett-Packard Printer Control Language
●
ASCII
: Standard ascii characters
●
HPGL2
: Hewlett-Packard Graphics Language (v2)
●
PS
: PostScript language
Support
support-name:
(or
support-contact:
)
Typically used to identify the name of a person to contact for support of this device.
support-number:
Typically used to specify a phone number or extension to call for support of this device.
support-url:
A Web URL for product information on this device over the Internet or an intranet.
tech-support-url:
A Web URL for technical support over the Internet or an intranet.
Using DHCP (IPv4)
Dynamic Host Configuration Protocol (DHCP, RFC 2131/2132) is one of several auto configuration
mechanisms that the HP Jetdirect print server uses. If you have a DHCP server on your network, the
HP Jetdirect print server automatically obtains its IP address from that server and registers its name
with any RFC 1001 and 1002-compliant dynamic name services as long as a WINS (Windows Internet
Naming Service) server IP address has been specified.
A TFTP (Trivial File Transfer Protocol) configuration file may also be used with DHCP to configure
extended parameters. For more information on TFTP parameters, see “
Using BOOTP/TFTP (IPv4)
on page 24 ”.
NOTE: DHCP services must be available on the server. Refer to your system documentation
or online help to install or enable DHCP services.
NOTE: If the Jetdirect print server and BOOTP/DHCP server are located on different subnets,
IP configuration may fail unless the routing device allows the transfer of DHCP requests between
subnets.
UNIX Systems
For more information on setting up DHCP on UNIX systems, see the bootpd man page.
On HP-UX systems, a sample DHCP configuration file (dhcptab) may be located in the
/etc
directory.
Table 3-2 TFTP Configuration File Parameters (continued)
36 Chapter 3 TCP/IP Configuration ENWW