HP 635n - JetDirect IPv6/IPsec Print Server, Руководство администратора, Страница: 36 / 202

Table 3-1 Tags Supported in a BOOTP/DHCP Boot file
Item RFC 2132
Option
Description
nodename
-- The name of the peripheral. This name identifies an entry point to a list of parameters for a
specific peripheral.
nodename
must be the first field in an entry. (In the example above,
nodename
is “
picasso
”.)
ht
-- The hardware type tag. For the HP Jetdirect print server, set this to
ether
(for Ethernet).
This tag must precede the
ha
tag.
vm
-- The BOOTP report format tag (required). Set this parameter to
rfc1048
.
ha
-- The hardware address tag. The hardware (MAC) address is the link-level, or station address
of the HP Jetdirect print server. It can be found on the HP Jetdirect configuration page as
the
HARDWARE ADDRESS .
ip
-- The IP address tag (required). This address will be the HP Jetdirect print server's IP address.
sm
1 The subnet mask tag. The subnet mask will be used by the HP Jetdirect print server to identify
the portions of an IP address that specify the network/subnetwork number and the host
address.
gw
3 The gateway IP address tag. This address identifies the IP address of the default gateway
(router) that the HP Jetdirect print server will use for communications with other subnets.
ds
6 DNS (Domain Name System) server's IP address tag. Only a single name server can be
specified.
lg
7 The syslog server's IP address tag. It specifies the server that the HP Jetdirect print server
sends syslog messages to.
hn
12 The host name tag. This tag does not take a value but causes the BOOTP daemon to
download the host name to the HP Jetdirect print server. The host name will be printed on
the Jetdirect configuration page, or returned on an SNMP sysName request by a network
application.
NOTE: Names, such as host names, must begin with a letter and can contain only
letters, numbers, periods (for domain names only), or hyphens. The underline
character (_) is not allowed.
dn
15 Domain name tag. Specifies the domain name for the HP Jetdirect print server (for example,
support.hp.com). It does not include the host name; it is not the Fully Qualified Domain Name
(such as printer1.support.hp.com).
ef
18 Extensions file tag that specifies the relative path name of the TFTP configuration file.
NOTE: This tag is similar to the vendor-specific tag T144, described below.
na
44 Tag for IP addresses of the NetBIOS-over-TCP/IP Name Server (NBNS). A primary and
secondary server may be specified in order of preference.
lease-time
51 DHCP IP address lease duration time (seconds).
tr
58 DHCP T1 timeout, specifying the DHCP lease renewal time (seconds).
tv
59 DHCP T2 timeout, specifying the DHCP lease rebind time (seconds).
T144
-- An HP-proprietary tag that specifies the relative path name of the TFTP configuration file.
Long path names may be truncated. The path name must be in double quotes (for example,
“pathname” ). For file format information, refer to “ TFTP Configuration File Entries (IPv4)
on page 27 ”.
26 Chapter 3 TCP/IP Configuration ENWW