HP 1660CS, Руководство пользователя

Страница: 88 / 347

To verify correct return from a function call
The exit code for a function will often contain instructions for deallocating
stack storage for local variables and restoring registers that were saved
during the function call. Some language implementations vary on these
points, with the calling function doing some of this work, so you may need to
adapt the procedure to suit your system.
1
Go to the state analyzer’s Trigger menu.
2
Define terms SR_START and SR_END to represent the start and end
addresses of the subroutine.
3
Under State Sequence Levels, insert 2 more sequence levels and enter
the following sequence specification:
•
While storing "anystate" Find "SR_START" Occurs "1" Else on "no state" go
to level "1"
•
While storing "anystate" Then find "SR_END" Occurs "1" Else on "no state"
go to level "2"
•
While storing "anystate" TRIGGER on "
≠
SR_START" Occurs "1" Else on
"SR_START" go to level "2"
Verifying correct return from a function call
Single-Machine Trigger Examples
To verify correct return from a function call
5-13