HP 1660CS, Руководство пользователя

Страница: 59 / 347

To assign terms to an analyzer
When you turn the logic analyzer on, Analyzer 1 is named Machine 1 and
Analyzer 2 is off. Trigger terms can only be used by one analyzer at a time,
so all the terms are assigned to Analyzer 1. If you plan to use both analyzers
in your measurement, you need to assign some of the terms to Analyzer 2.
1
Go to the Trigger Machine 1 menu.
If you have renamed Machine 1 in the Analyzer Configuration menu, the
name you changed it to will appear in the menu instead of Machine 1.
2
Select a term.
The terms are the fields below the roll field "Terms". See the figure below.
3
Select Assign from the list that appears.
The Resource Term Assignment menu appears. It is divided into two
sections, one for each analyzer. All the terms are listed.
4
To change a term assignment, select the term field.
The term fields toggle from one section to the other. You can get all your
terms assigned at once, or just change a few to meet immediate needs.
5
To exit the term assignment menu, select Done.
Terms
Using the Trigger Menu
To assign terms to an analyzer
4–4