Hoval BioLyt 100, Техническая информация Инструкции по установке

Страница: 4 / 52

1. Important notes
1.1 Safety instructions
The system may only be placed in operation
if all the relevant standards and safety regula-
tions have been complied with.
WARNING
The heat generator can only be de-energised
by disconnection from the mains (e.g. all-po-
le switch).
WARNING
All electrical power supply circuits must be
switched off before accessing the terminals.
1.2 Explanation of the symbols
1.2.1 Warnings
!
DANGER
... indicates a situation of immediate danger
which will lead to serious or fatal injuries if
not avoided.
!
WARNING
... indicates a situation of possible danger
which can lead to serious or fatal injuries if
not avoided.
!
CAUTION
... indicates a situation of possible danger
which can lead to minor or slight injuries if
not avoided.
NOTICE
... indicates a situation of possible danger
which can lead to damage to property if not
avoided.
1.2.2 Warning symbols
The following warning signs are combined for the war-
ning notes with signal words CAUTION, WARNING and
DANGER.
!
General warning of a danger zone.
“Warning: dangerous electrical voltage” as a
warning for accident prevention.
Ensures that people do not come into contact
with electrical voltage. The danger sign with
the black lighting symbol warns against the
danger of electrical voltage.
Information:
Provides important information.
§
Provides important information. Refers to
standards and directives.
1.3 On delivery
Carry out a visual inspection immediately on receiving the
boiler. If any damage is found, take the necessary steps
as defined in the delivery contract. The respective risk
carrier bears the cost of repairs.
1.4 Warranty
The warranty does not cover defects attributable to:
• Failure to comply with these instructions
• Failure to comply with the operating instructions
• Incorrect installation
• Impermissible modifications
• Incorrect handling
• Contaminated operating materials (pellets, water, com-
bustion air)
• Unsuitable chemical additives to the heating water
• Damage caused by the application of force
• Corrosion by halogen compounds (e.g. paints, adhesi-
ves, solvents)
• Corrosion caused by not observing the required water
quality
4 4 214 852 / 01
IMpORTAnT nOTES