manualshive.com logo in svg

Hoval 51-UltraGas 2 1000, Руководство по установке, Страница: 5 / 66

Поделиться
Скачать
Hoval 51-UltraGas 2 1000 Скачать руководство пользователя страница 5

5

4 220 456 / 02 

IMPORTANT NOTICES

1.2.3  Information

Information:

Provides important information.

Tool:

Indicates which tool you will need for the next 

work step.

§

Provides important information. Refers to 

standards and directives.

Read the operating instructions before instal-

lation and commissioning.

Read the installation instructions before in-

stallation.

1.3 

On delivery

Carry out a visual inspection immediately on receiving the 

boiler. If any damage is found, take the necessary steps 

as  defined  in  the  delivery  contract.  The  respective  risk 

carrier bears the cost of repairs.

1.4 

Guarantee

The guarantee does not cover defects attributable to:

•  Failure to comply with these instructions

•  Failure to comply with the operating instructions

•  Incorrect installation

• 

Impermissible modifications

•  Incorrect handling

•  Contaminated operating materials (gas, water, com-

bustion air)

•  Unsuitable chemical additives to the heating water

•  Damage caused by the application of force

•  Corrosion by halogen compounds (e.g. paints, adhe-

sives, solvents)

•  Corrosion caused by not observing the required water 

quality (see chapter 5.3)

1.5 

Instructions

All instructions relevant to your plant can be found in the 

Hoval system manual - please keep all manuals! In ex-

ceptional cases, the instructions can be found with the 

components!

Further sources of information:

•  Hoval catalogue

•  Standards, regulations

Содержание 51-UltraGas 2 1000



































































Отзывы:

Нет отзывов