Hoval 51-UltraGas 2 1000 Скачать руководство пользователя страница 31

Страница: 31 / 66

4 220 456 / 02

INSTAllATION

Installation

4.1

Safety instructions

CAUTION

Cutting injuries as a result of sharp edges.

Handle sections of the cladding carefully and

avoid contact with sharp edges.

4.2

Requirements on the boiler room

Regarding the building specifications for boil

er rooms, regulations specific to the state or

country are to be observed.

CAUTION
Danger of corrosion on the heating gas or

flue gas side

Gas boilers must not be installed in rooms

in which halogen compounds occur and can

get into the combustion air (e.g. washrooms,

drying rooms, hobby rooms, hairdressers).

Halogen compounds can be created, for ex-

ample, by cleansing and degreasing agents,

solvents, glue and bleaches.

The following conditions must be met in the boiler room

where the UltraGas

2 is installed:

•

The necessary combustion air must be able to flow in

without obstruction. This contributes to correct function

of all the firing devices that are operated there, and pro

vides oxygen for the operating personnel to breathe.

• An adequate supply of fresh air must be guaranteed, ac-

cording to local regulations.

4.2.1 Room air dependent installation

Binding values for the size of supply air openings are not

generally specified in the relevant regulations. It is merely

required that no negative pressure in excess of 3 N/m

occurs in the boiler room. The locally applicable regula-

tions must be complied with.

4.2.2 Room air independent installation

Variant using “Connection for direct combus-

tion air supply” or “Motorised air intake damp

er” (optional):

•

When configuring the intake tube, comply

with the following:

- If the air intake opening at the facade is

near a noise sensitive place (window of

bedroom, terrace etc.), we recommend

using a silencer at the direct fresh air in-

take.

- The air intake opening must be freely ac-

cessible and have a protective grating or

possibly wind protection equipment.

- Always keep the air intake opening clear

(leaves, snow, ...).

- Do not store any chemicals or poisonous

substances in the vicinity of the air intake

opening.

- Do not install the air intake opening adja-

cent to extractor hood openings or other

air extraction equipment.

Содержание 51-UltraGas 2 1000



































































Результаты поиска

Содержание 51-UltraGas 2 1000

Отзывы:

Hoval 51-UltraGas 2 1000, Руководство по установке, Страница: 31 / 66

Результаты поиска

Содержание 51-UltraGas 2 1000

Отзывы: