horsch Terrano 10 FG, Руководство по эксплуатации

Страница: 37 / 42

Maintenance schedule
Maintenance schedule Terrano 6 - 12 FG
After the first few operating hours Work instructions Interval
All bolted and plug-in connections
Check for tightness and tighten screw connections
Tool carrier Check fastening and retighten with 400 Nm
Tandem axle bearings (10 / 12 FG) Retighten 3 screws with 80 - 90 Nm
in operation
Tines, tine holders and tine springs Check for condition, tight fit and wear prior to use
Points and point fastening
Check for condition, tight fit and wear prior to use
Harrow and harrow brackets Check for condition, tight fit and wear prior to use
Frame and frame connecting parts Check for condition, tight fit and wear prior to use
Hydraulic hoses and components Leak tightness, fastening and chafing prior to use
Tandem axle bearings Check for condition, tight fit and moveability prior to use
Wheel bearings on tandem and support
wheels
Check condition, clearance and smooth running prior to use
Wheels, wheel nuts and air pressure Check condition, tight fit 4,0 - 4,5 bar prior to use
Road lighting equipment and safety
covering
Condition, function and cleanliness prior to use
Hydraulic lines, lifting hydraulics replace (MRL Anh I EN 1533) 3-5 years
at the end of the season
Complete machine Carry out servicing and cleaning work
Piston rods on hydraulic cylinders Use oil, grease or other means to protect piston rods against
corrosion
Overview of lubrication points Terrano 6 - 12 FG
Lubrication points Terrano FG 6 8 10 12 Interval
Bolts - wing pivot point 4 4 8 8
Bolts - drawbar 2 2 2 2
Wheel hub undercarriage 4 4 4 4
Bolts on support wheel 2 2 4
Wheel hub - support wheel 2 2 4
Undercarriage mounting 14 14 22 22
Mounting of slope coulter 1 1 1 1