horsch Maestro CX, Перевод оригинальной инструкции по эксплуатации

Страница: 145 / 184

Optional equipment | 14
60013444 • 01 • 01/2021 • en 145
WARNING
Danger of crushing on the pipe connecting flange.
Ø
Do not hold the pipe by the connecting flange when swinging out!
1. Remove the covering (1) from the connecting flange.
2. Open the lid on the connecting flange (2),(3).
3. Pull out the locking bolt (4).
4. Swing the swivelling part down to the stop position and lock it with both turn-
buckles.
5. Remove the covering from the filling funnel.
Filling
1. Switch on the hydraulic drive on the tractor:
Switch on the filling auger
2. Run the tractor with raised engine speed.
3. Switch on the hydraulic motor by the three-way valve.
4. Fill fertiliser into the hopper. Watch out for foreign particles!
5. After the end of filling allow the screw to run slightly longer and shut down
the hydraulic drive by the three-way valve.
6. Switch off the hydraulic drive on the tractor and shut down the engine.
Folding in 1. Attach the covering to the filling funnel.
2. Place a suitable container under the folding spot to take up residues from the
auger tube.
3. Unlock the swivelling part and swivel it upward.
4. Insert the locking bolt (4) and secure it with the cotter pin.
5. Attach the covering to the swivelling tube (1).
6. Close the lid on the connecting flange and secure it (2),(3).
WARNING
Danger of traffic accidents!
Ø
Check the locking and securing mechanism of the swivelling auger section be-
fore road travel.