horsch Maestro CX, Перевод оригинальной инструкции по эксплуатации

Страница: 87 / 184

Drill unit | 8
60013444 • 01 • 01/2021 • en 87
1
2
Depth setting
1
Adjustment bolts
2 Depth setting scale
1. Lifting the machine.
2. Remove the lock from the adjustment bolt (1), insert the bolt at the desired
position (see scale) and secure it again.
3. Set the drilling depth identically on all drill units.
NOTE
Ø
Check the seed placement whenever changing the depth setting.
Ø If the seed placement is adjusted deeper, you must check the coulter pres-
sure. If necessary, you must increase the coulter pressure in order to assure
the drilling depth.
The depth guide wheels must be pressed to the ground with sufficient pres-
sure, and the wheels must always turn.
However, the pressure should not be higher than necessary.
Ø
If increased wear occurs on the drill units behind the tractor tracks, a greater
drilling depth may need to be set on these drill units.
Regularly check wear and drilling depth on the drill units behind the tractor
tracks.
NOTE
We recommend deactivating the AutoForce auxiliary equipment from position 12
since regulating errors may otherwise occur in the system. See information decal on
the drill unit: