horsch Maestro CX, Перевод оригинальной инструкции по эксплуатации

Страница: 54 / 184

6 | Operation
54 60013444 • 01 • 01/2021 • en
6.2.1 Unfolding
1. Position the machine at a suitable location and immobilise it.
2. Turn on the drill controls.
3. Switch on the hydraulic Lift function in the display.
4. In the Folding in menu, activate the softkey Lift/fold seed bar .
5. Operate the control unit and thereby lift the wings off the hopper and unfold
them to the stop.
6. Check the pre-tensioning pressure for the folding cylinders on the pressure
gauge (minimum pressure 100 bar).
7. Press the softkey Lower seed bar to completely lower the seed bar.
8. Continue retracting the hydraulic cylinders for lifting/lowering thereby lower-
ing the seed bar to the ground.
1
2
The bout markers are folded hydraulically only on the inside joints.
Remove the bolts (1) on the bout markers and unfold the outer joints by hand (2).
Insert the bolts and secure with the cotter pin (1).
Klappung beendet.
Geschwindigkeit
reduzieren!