Honeywell VX3Plus, Справочное руководство, Страница: 93 / 282

Message Explanation and/or corrective action Level
AppName value in the Administration key is not available.
Opened status file The status information is being saved to a file and the file has been opened successfully. LOG_EX
Out of memory for
encrypted pwd
Not enough memory to encrypt the password. LOG_ERROR
pRealTaskbarWndProc
already set
The taskbar control has already been installed. LOG_EX
Pwd cancelled or invalid-
remain in user mode The password prompt was cancelled by the user or the maximum number of failed
attempts to enter a password was exceeded.
LOG_EX
Read registry error-hot
key The hotkey registry entry is missing or empty. This is not considered an error. The key-
board hook uses an embedded default if the value is not set in the registry.
LOG_ERROR
Read registry failure-app
name AppName registry value does not exist or is empty. This constitutes a failure for switching
into user mode.
LOG_ERROR
Read registry failure-
Cmd Line AppCommandLine registry entry is missing or empty. This is not considered an error
since command line information is not necessary to launch and lock the application.
LOG_ERROR
Read registry failure-Inter-
net The Internet registry entry is missing or empty. This is not considered an error since the
Internet value is not necessary to launch and lock the application.
LOG_ERROR
Registering Backdoor
MSG The AppLock system communicates with the keyboard hook via a user defined message.
Both AppLock.exe and Kbdhook.dll register the message at initialization. LOG_PROC-
ESSING
Registering Hotkey MSG
The AppLock system communicates with the keyboard hook via a user defined message.
Both Applock.exe and Kbdhook.dll register the message at initialization. LOG_PROC-
ESSING
Registry read failure at
reenter user mode
The registry has to be read when entering user mode is the AppName is missing. This
user mode entry is attempted at boot and after a hotkey switch when the administrator has
closed the application being locked or has changed the application name or command
line.
LOG_ERROR
Registry read failure at
reenter user mode
The registry has to be read when switching into user mode. This is because the admin-
istrator can change the settings during administration mode. The read of the registry failed
which means the Administration key was not found or the AppName value was missing or
empty.
LOG_ERROR
Registry read failure
The registry read failed. The registry information read when this message is logged is the
application information. It the Administration key cannot be opened or if the AppName
value is missing or empty, this error is logged. The other application information is not
required. If the AppName value is not available, AppLock cannot switch into user mode.
LOG_ERROR
Reset system work area
failure
The system work area is adjusted when in user mode to cover the taskbar area. The sys-
tem work area has to be adjusted to exclude the taskbar area in administration mode.
AppLock was unable to adjust this area.
LOG_ERROR
Shift pressed The Shift key has been pressed and trapped by the HotKey processing. LOG_EX
Shift Processing the hotkey and backdoor entry LOG_EX
Show taskbar The taskbar is now being made visible and enabled.
LOG_PROC-
ESSING
Switching to admin-back-
door The system is currently in user mode and is now switching to admin mode. The switch
occurred because of the backdoor key presses were entered by the administrator. LOG_PROC-
ESSING
Switching to admin-hot-
key press The system is currently in user mode and is now switching to admin mode. The switch
occurred because of a hotkey press by the administrator. LOG_PROC-
ESSING
Switching to admin-
kbdhook.dll not found
The keyboard hook load failed, so AppLock switches to admin mode. If a password is
specified, the password prompt is displayed and remains until a valid password is
entered.
LOG_PROC-
ESSING
3-53