Honeywell VX3Plus Скачать руководство пользователя страница 114

Страница: 114 / 282

The mobile Bluetooth scanner / imager requires this information before discovering, pairing, connecting or disconnecting can
occur.

Important

: The VX3Plus Bluetooth address identifier label should remain protected from damage (rips, tears, spills, soiling,

erasure, etc.) at all times. It may be required when pairing, connecting, and disconnecting new Bluetooth barcode readers.

VX3Plus with Label

If the VX3Plus has a

Bluetooth address barcode label

attached, follow these steps:

1. Scan the Bluetooth address barcode label, attached to the VX3Plus, with the Bluetooth mobile scanner.

2. If this is the first time the Bluetooth mobile scanner has scanned the VX3Plus Bluetooth label, the devices are paired.

See section titled “

Bluetooth Beep and LED Indications

”. If the devices do not pair successfully, go to the next step.

3. Open the LXEZ Pairing panel (

Start > Settings > Control Panel > Bluetooth

4. Tap

Discover.

Locate the Bluetooth scanner in the Discovery panel.

5. Double-tap the stylus on the Bluetooth

mobile device

in the list. The right-mouse-click menu appears.

6. Select

Pair as Scanner

to pair the VX3Plus with the Bluetooth mobile scanner.

The devices are paired. The Bluetooth mobile barcode reader responds with a series of beeps and an LED flashes. Refer to the
following section titled “

Bluetooth Beep and LED Indications

”.

Note:

After scanning the VX3Plus Bluetooth label, if there is no beep and no LED flash from the Bluetooth

mobile device, the devices are currently paired.

VX3Plus without Label

If the VX3Plus

Bluetooth address barcode label

does not exist, follow these steps to create a unique Bluetooth address barcode

for the VX3Plus:

First, locate the VX3Plus Bluetooth address by tapping

Start > Settings > Control Panel > Bluetooth > About

tab.

Free barcode creation software is available for download on the World Wide Web. Search using the keywords “barcode

create”.

3-74

Содержание VX3Plus



























































































































































































































































































Результаты поиска

Содержание VX3Plus

Отзывы:

Honeywell VX3Plus, Справочное руководство, Страница: 114 / 282

Результаты поиска

Содержание VX3Plus

Отзывы: