Honeywell VX3Plus Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 282

Honeywell VX3Plus Скачать руководство пользователя страница 81

Option

Explanation

Input Panel

Default is Disabled. Enable (check) to show the Keyboard option on the Switchpad menu. When
enabled the input panel cannot be enabled or disabled for each individual application, and is avail-
able to the user for all configured applications.

Clear Button

Tap the Clear button to clear all currently displayed Filename or Application information. The Global
settings are not cleared.

Scroll Buttons

Use the left and right scroll buttons to move from application setup screen to application setup
screen. The left and right buttons update the information on the screen with the previous or next con-
figured application respectively.

Launch Button

Note:

The Launch button may not be available in all versions of Multi-AppLock. Contact your

representative

for assistance, downloads and AppLock update availability.

When clicked, displays the Launch options panel for the Filename selected on the Administration panel.

Note:

Launch order is determined by the Order specified in the Application tab. The Order value does not

have to be sequential.

Auto At Boot

Default is Enabled.

Auto At Boot

3-41

«
...
79
80
81
82
83
...
»

Содержание VX3Plus



























































































































































































































































































Отзывы:

Нет отзывов