Honeywell VX3Plus, Справочное руководство, Страница: 60 / 282

l
The SD / CF card with the OS and systems files must be present for the VX3Plus to boot. Removal or installation of SD
or CF cards should be performed on a clean, well-lit surface.
l
Always perform OS updates when the VX3Plus has a dependable external power source connected to the VX3Plus.
Procedure
1. Verify a dependable power source is applied to the VX3Plus and will stay connected during the upgrade procedure.
2. Establish an ActiveSync connection between the VX3Plus and a desktop/laptop computer.
3. Download the OS files from the desktop/laptop to the VX3Plus's System folder.
4. During the file copy process to the VX3Plus System folder, when asked “Overwrite ?”, select Yes to All.
5. Review the files that were downloaded to the System folder.
6. Restart the VX3Plus.
7. Disconnect from ActiveSync.
8. When the OS finishes loading, check the OS update version by selecting Start > Settings > Control Panel > About >
Software tab.
The touch screen may require calibration, however most Windows OS versions save the calibration data, eliminating the need
to calibrate.
Contact your representative for re-imaging options if the VX3Plus won't boot up after the upgrade is finished.
Warning: Opening the device e.g. removing endcaps or access panels, etc. could void the user's authority to
operate this equipment.
ActiveSync
Introduction
Once a relationship (partnership) has been established with Connect (on a desktop computer), ActiveSync will synchronize
using the wireless link, serial port, or USB on the VX3Plus.
Requirement : ActiveSync (version 4.5 or higher for Windows XP desktop/laptop computers) must be resident on the host
(desktop/laptop) computer. Windows Mobile Device Center is required for a Windows Vista/Windows 7 desktop/laptop
computer. ActiveSync and Windows Mobile Device Center for the PC is available from the Microsoft website. Follow their
instructions to locate, download and install ActiveSync or Windows Mobile Device Center on your desktop computer.
Note: For readability in this section, ActiveSync will be used in instructions and explanations. If you have a
Windows Vista or Windows 7 operating system on your desktop/laptop, replace ActiveSync with
Windows Mobile Device Center.
Using Microsoft ActiveSync, you can synchronize information on your desktop computer with the VX3Plus and vice versa.
Synchronization compares the data on your mobile device with your desktop computer and updates both with the most recent
data.
For example, you can:
l
Back up and restore your device data.
l
Copy (rather than synchronize) files between your device and desktop computer.
l
Control when synchronization occurs by selecting a synchronization mode. For example, you can synchronize
continually while connected to your desktop computer or only when you choose the synchronize command.
3-20