Honeywell VX3Plus, Справочное руководство, Страница: 221 / 282

Chapter 5: Wireless Network Configuration
The Summit client device is either an 802.11g radio, capable of both 802.11b and 802.11g data rates or an 802.11a radio,
capable of 802.11a, 802.11b and 802.11g data rates. The radio can be configured for no encryption, WEP encryption or WPA
security.
Security Options Supported are
l
None
l
WEP
l
LEAP
l
WPA-PSK
l
WPA/LEAP
l
PEAP-MSCHAP
l
PEAP-GTC
l
EAP-TLS
l
EAP-FAST
Important Notes
It is important that all dates are correct on the VX3Plus and host computers when using any type of certificate.
Certificates are date sensitive and if the date is not correct authentication will fail.
It may be necessary to upgrade radio software in order to use certain Summit Client Utility (SCU) features.
Contact your
representative for details.
When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation. For regulatory
domains in which the U-NII 3 band is allowed, the following channels are supported: 149, 157 and 161. The AP
must be configured accordingly.
Summit Client Utility
Note: When making changes to profile or global parameters, the device should be warmbooted afterwards.
Start > Programs > Summit > SCU or
SCU Icon on Desktop or
Summit Tray Icon (if present) or
Wi-FI Icon in the Windows Control Panel (if present)
The Main Tab provides information, admin login and active profile selection.
Profile specific parameters are found on the Profile Tab . The parameters on this tab can be set to unique values for each profile.
This tab was labeled Config in early versions of the SCU.
The Status Tab contains information on the current connection.
5-1