Honeywell VX3Plus Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 282

Honeywell VX3Plus Скачать руководство пользователя страница 112

Subsequent Use

Note:

Taskbar and Bluetooth device Icon states change as Bluetooth devices are discovered, paired,

connected and disconnected. A taskbar Bluetooth icon with a red background indicates Bluetooth is
active and not paired with any device. A device icon with a red background indicates a disconnected
paired device.

1. Tap the

Bluetooth icon

in the taskbar or on the desktop to open the Bluetooth LXEZ Pairing application.

2. Tap the Bluetooth

Devices

tab.

3. Tap the

Discover

button. When the Bluetooth module begins searching for in-range Bluetooth devices, the button name

changes to Stop. Tap the Stop button to cancel the Discover function at any time.

4. The discovered devices are listed in the Bluetooth

Devices

window.

5.

Highlight

a Bluetooth device in the Discovered window and double-tap to open the device properties menu.

6. Tap

Pair as Scanner

to set up the VX3Plus to receive scanner data.

7. Tap

Pair as Printer

to set up the VX3Plus to send data to the printer.

8. Tap

Serial Device

(when Filtered mode is disabled) to set up the VX3Plus to communicate with a Bluetooth serial

device.

9. Tap HID Device to pair a HID device.

10. Tap PAN Device to pair a PAN device.

11. Tap DUN Device to pair a DUN device.

12. Tap

Disconnect

to stop pairing with the device. Once disconnected, tap

Delete

to remove the device name and data

from the VX3Plus Bluetooth Devices list. The device is deleted from the list after the OK button is clicked.

13. Upon successful pairing, the selected device may react to indicate a successful connection. The reaction may be an

audio signal from the device, flashing LED on the device, or a dialog box is placed on the VX3Plus display.

14. Whenever the VX3Plus is turned On, all previously paired, live, Bluetooth devices in the vicinity are paired, one at a

time, with the VX3Plus. If the devices cannot connect to the VX3Plus before the re-connect timeout time period expires
(default is approximately 20 seconds for each paired device) there is no indication of the continuing disconnect state if

Report Failure to Reconnect

is disabled.

3-72

«
...
110
111
112
113
114
...
»

Содержание VX3Plus



























































































































































































































































































Отзывы:

Нет отзывов