Honeywell VX3Plus Скачать руководство пользователя страница 160 | Manualshive

Страница: 160 / 282

Honeywell VX3Plus Скачать руководство пользователя страница 160

Single Scan

Single Scan determines if scanner input is inhibited after a scan until the scanner is re-enabled.

Off - Single Scan mode is off.
Auto - Single Scan mode is on. The scanner is disabled after a scan and automatically re-enabled by
the scanner driver after retrieving the bar code data.
Man - Single Scan mode is on. The scanner is disabled after a scan and the user application must
call LXEScannerSSReset to re-enable the scanner. See the CE API Programming Guide for more
details.

This option is only supported on Symbol (Motorola) internal and BTRS scanners. The scanner may
require a firmware upgrade to support this feature. Contact your

for details.

On Delay Ms

Specifies the screen on delay for the

screen blanking

function.

Click

here to view factory default settings

for this panel.

Screen Blanking

The VX3Plus can be configured to blank the display when the vehicle to which it is mounted is moving, eliminating a possible
distraction for the driver. When configured properly, the screen blanking feature provides a tamper resistant method to blank
the vehicle screen. The screen blanking feature consists of Scanner Control Panel Options and a customer supplied cable
connected to one of the COM ports on the VX3Plus. Properly configured, the display is visible only when the cable provides a
signal that the vehicle has stopped.

The customer must supply their own cable. The cable specifications are detailed in “

Technical Specifications – Screen

The cable can be hooked to either the COM1 or COM3 port. The COM port used must be selected in the

Scanner

control

panel.

Screen blanking is configured on the

Main

tab of the

Scanner

control panel.

l

If the COM1/COM3 screen blanking and On Delay choices are not shown, the system load must be updated.

l

Warning: Do not select

COM1 ScrCtl

or

COM3 ScrCtl

unless you have already attached the cable. Failure to attach

the cable before selecting a screen blanking option will cause the screen to go blank (and remain blank) until an
appropriate cable is attached to the specified COM port.

Set the desired COM port (COM1 ScrCtl or COM3 ScrCtl) and On Delay. Press

OK

. The On Delay can be used to specify the

time (in milliseconds) before the display turns on. For example, use the On Delay if the switch end of the cable is attached to

3-120

«
...
158
159
160
161
162
...
»

Содержание VX3Plus



























































































































































































































































































Отзывы:

Нет отзывов