Honeywell T5810XL Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 99

background image

A

BOUT THIS GUIDE

This guide defines Experion Platforms based on the Honeywell-configured Dell Precision T5810XL
workstation, which uses a Quad-Core Intel Xeon processor in a single processor configuration. The
configuration rules defined in this document apply to the Experion deskside/tower configuration, the
Icon Series console, the Z console, the Classic console and the EZ console.

NOTE

If the Local Control Network (LCN) coaxial based system has been integrated with an Experion
Fault Tolerant Ethernet (FTE) based system, the node (server) may be upgraded to be an
Experion Local Control Network (ELCN) node, which has its ELCN Interface provided via FTE.
This node may be installed as a physical or virtual platform.

If the node is upgraded to an ELCN node, and the node is a physical (a.k.a. bare-metal)
platform, a Local Control Network Processor (LCNP) board coaxial interface to LCN is not used.
The LCN MAU is disconnected, and/or the LCNP board is removed.

Redundant ELCN Bridges are required if the ELCN node is communicating with any other
existing, coaxial-based LCN node.

Some LCN nodes may have been replaced by their ELCN equivalent nodes, and overall system
features/architecture will differ from that of a non-ELCN integrated system (classic LCN/TPN
system). In this case it may be necessary to refer to appropriate ELCN documentation, in
addition to the information provided herein.

The following table lists Honeywell ELCN/Experion publications that may be useful for
references.

ELCN Reference Documents Table for Server/Workstation PSIG Documents

Publication

Content Type

Experion LCN Hardware
Upgrade Kit Instructions
(51195195-415)

UEA installation

Experion LCN Quick Start
Guide (EPDOC-X480-en-
511A)

General hardware/software/migration information

Experion Software Installation
User's Guide (EPDOC-X136-
en-511A)

Experion software installation (various methods)

Experion LCN Overview and
Implementation Guide

Bridge hardware installation, software configuration,
operation, servicing/troubleshooting

- 6 -

CHAPTER

1

«
...
4
5
6
7
8
...
»

Содержание T5810XL




































































































Отзывы:

Нет отзывов

Похожие инструкции для T5810XL

Бренд: ADLINK Technology Страницы: 76

Бренд: Radio Shack Страницы: 40

Бренд: Montezuma Страницы: 24

Бренд: Gateway Страницы: 1

Eee Top ET16 Series

Бренд: Asus Страницы: 34

Бренд: Asus Страницы: 3

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 60

Бренд: Asus Страницы: 86

Бренд: Asus Страницы: 50

Бренд: Asus Страницы: 40

Бренд: Asus Страницы: 38

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 95

Бренд: Asus Страницы: 50

Бренд: Asus Страницы: 70

Бренд: Asus Страницы: 38

DiGiMatrix AB-V100

Бренд: Asus Страницы: 112

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды