manualshive.com logo in svg

Honeywell Notifier NFS2-640/E, Руководство по программированию, Страница: 15 / 126

Поделиться
Скачать
Honeywell Notifier NFS2-640/E Скачать руководство пользователя страница 15

NFS2-640/E Programming Manual —

 P/N 52742:L2 7/17/14  

15

Basic Program

Programming

2.3.1  Clear Memory (0=

CLR

)

The Clear option removes all programming information from control panel 
memory. If installing the control panel for the first time, use option 0 to clear 
control panel memory. To do so, follow these steps:

1. From the “Basic Program” screen, press the 

0

 (zero) key to display the Clear Program screen. 

The control panel prompts for verification as shown below: 

2. Press the 

ENTER

 key to clear control panel memory or press the 

ESC

 key to exit the screen 

without clearing.

2.3.2  Autoprogram the Control Panel (1=

AUTO

)

Purpose

The Autoprogram option identifies all addressable devices connected to the control panel. Devices 
include addressable detectors and modules connected to SLC 1 or SLC 2, and NACs. You can use 
the Autoprogram option to create a new program and add or remove devices. A summary of the 
Autoprogram functions, when to use the functions, and where to find information on using the 
functions is found below: 

Create a New Program for the Control Panel

This section covers how to use the Autoprogram option to create a new 
program for the control panel. The control panel will identify all addressable 
detectors and modules connected to the SLC.

To create a new program for the control panel, follow these steps:

Program Change 
Password

P R E S S   E N T E R   T O   C L E A R   E N T I R E   P R O G R A M

   

O R   E S C A P E   T O   A B O R T

 

Autoprogram Function

Control Panel Configuration

Refer to...

Create a new program for 
the control panel

A new control panel or a control panel with no 
existing program in memory.

“Create a New Program for the 
Control Panel” on page 15

Add one or more 
SLC-connected detectors 
and modules to an 
existing program

A program exists in memory and you want to 
add a detector or module to the existing 
program—without modifying information for 
existing detectors and modules.

“Add a Device to the Program” 
on page 16

Remove one or more 
SLC-connected detectors 
and modules from an 
existing program

A program exists in memory and you want to 
remove an installed detector or module from 
the existing program—without modifying 
information for existing detectors and 
modules.

“Remove a Device from the 
Program” on page 17

View system defaults

A program exists in memory and you want to 
view system settings assigned during 
Autoprogram, such as custom labels, 
passwords, and so on.

Page 19 “Change Autoprogram 
Default Value” to see the system 
defaults

Program Change 
Password

Содержание Notifier NFS2-640/E































































































































Отзывы:

Нет отзывов