manualshive.com logo in svg

Honeywell MAXPRO NVR Hybrid PE, Руководство по установке и настройке оборудования

Поделиться
Скачать
Honeywell MAXPRO NVR Hybrid PE Скачать руководство пользователя страница 142

C O N F I G U R I N G   M A X P R O   N V R

Configuring the Cameras

142

 MAXPRO NVR 5.0 Installation and Configuration Guide

6

The encoder is discovered as a single device in the 

Cameras Discovered 

pane, and “n” 

number of cameras (where n is the number of channels supported by the encoder) are added 
under 

Camera

 as shown in the following figure.

Note:

• For AXIS encoders, n+1 streams are typically added (might vary by models) 

with 1 additional stream providing the matrix view of all cameras. This matrix 
view added can be deleted if it is not required by the user. 
To discover and configure the AXIS Camera/Encoders as an ONVIF device in 
MAXPRO NVRs, see Appendix B 

MAXPRO®NVRs - AXIS Camera/Encoders 

Discovery and Configuration (using ONVIF) 

section on page 

343

.

• For multi-channel encoders and multi-imager 

180/360

 cameras with single IP, 

only one channel license is consumed. Maximum System limit is 

64

 cameras 

including, the cameras connected through encoders and the 
cameras/streams connected from the multi-imager is 180/360 cameras. 
Multistream or Dual stream is not supported for encorders.

Figure 6-18    Adding the Encoder

Note:

The 

Video Channel

 

Number

 field can be modified, but it is recommended that

you do not change the information in this field. 

Содержание MAXPRO NVR Hybrid PE









































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды