manualshive.com logo in svg

Honeywell MAXPRO NVR Hybrid PE, Руководство по установке и настройке оборудования

Поделиться
Скачать
Honeywell MAXPRO NVR Hybrid PE Скачать руководство пользователя страница 125

. . . . .

C O N F I G U R I N G   M A X P R O   N V R

Configuring the Disk Management Settings

MAXPRO NVR 5.0 Installation and Configuration Guide

125

You can also view a graphical illustration of the drive statistics with legends for each of the 
above fields see 

Figure 6-9

.

Figure 6-9    Graphical Illustration

•

In  the 

Recording recycle at 

box, type a value. The Recording recycle refers to a 

state when the oldest video recordings are automatically deleted, if there is no disk 
space on the drives for new video recordings.

•

In  the 

Low disk alarm at

 box, type a value. The Low disk alarm refers to a state when 

the space on the drives for video storage is nearing the maximum size of the drives.

Caution:

The 

Low disk alarm at 

value must be always greater than the 

Recording 

recycle 

at value.

Tip: 

Click 

Refresh

 to refresh the information under 

Disk Space

 at any point in time.

5.

Click 

Add Drive

 to add a fixed drive or a network drive. 

•

The fixed drive that you are adding must be available on the MAXPRO NVR system, 
else an “

Invalid Drive

” text displays in the 

Total Space (GB)

 column.

•

Add Network Drive using map drive as \\Drivename\Folder.

•

Add a network drive path in the following format: 

\\<IP address >\<folder name>

 

for example, 

\\192.168.1.12\Recorded Clips

.

Note:

The Network drive added must be valid with proper folder permissions set for the
installed default user, else an 

Invalid Drive

 text displays in the 

Total Space (GB)

column.

Содержание MAXPRO NVR Hybrid PE









































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды