Honeywell LYNX Touch 7000, Руководство пользователя

Страница: 36 / 78

74-2760—1 36
IMPORTANT
1. Wireless button-type transmitters DO NOT provide visual or audible
indications of system functions. Therefore, to confirm that the desired
function (such as arming) has occurred after pressing a function button on
your wireless key, be sure to listen for appropriate beeps from your
system’s keypads or view the status message at a keypad’s display.
Otherwise, you could inadvertently leave your home unprotected.
2. If a protection point is open when you try to turn your system on with the
wireless key, you will hear three short tones and your system will remain
off. Make sure you check the status of your protection points by pressing
the down arrow and close points that have been left open before you leave
your house and arm the system with your wireless key.
3. If you program your wireless key to disarm your system, remember to keep
the key separate from any address information for your home. This will help
keep you protected in the event of theft.
Wireless Pendant
An optional wireless pendant can be used to remotely activate panic/medical alarms.
Your wireless pendant has one button that can be programmed at the time of installation.
You may chose the function of the button depending on your specific security needs.
When pressed, the wireless pendant will cause an alarm regardless of your current
security mode. You can determine, at the time of installation, whether this alarm is
silent or sounds an audible.