manualshive.com logo in svg

Honeywell LYNX Touch 7000, Руководство пользователя, Страница: 64 / 78

Поделиться
Скачать
Honeywell LYNX Touch 7000 Скачать руководство пользователя страница 64

74-2760—1

64

Trouble Messages (Continued)

THE SMITH'S

M6942

THE SMITH'S

M6942

AC POWER FAIL

M6996

SYST LOW BATTERY

M6997A

NOTE:

The Customer Service Center receives a signal from your system when
low battery problems occur, and notifies the first available person on your
Call List.

HORN FAILURE

M14240

RF RECEIVER

INTERFERENCE

M14241

What You See

What Is Wrong

What You Should Do

----------------

1.

The low voltage
ac transformer
is loose or
unplugged.

2.

Power failure.

1.

Check the low voltage
transformer, usually located
near the control panel.

2.

Restore house power. If
there is not a power failure,
call Honeywell for service.

----------------

The control panel
system backup
battery is defective
or weakened after
extended ac failure
(see note below).

Call Honeywell for service.

The wire to the horn
or siren is cut or
broken. The siren
can not sound.

1.

Enter passcode to silence
the warning tone.

2.

Call Honeywell for service.

Radio signals are
jamming the
communication from
the security sensors
and also possibly
preventing alarms
from being received
by the system.

1.

Enter passcode to silence
the warning tone.

2.

Call Honeywell for service.

No display shows.

There is no ac or
backup battery
power to the
system.

1.

If only some lights are out in
your home, check your
house’s circuit breakers or
fuses and restore as
necessary.

2.

Make sure the low voltage
transformer near the control
panel is securely plugged
into an ac outlet.

3.

Call Honeywell for service.

Содержание LYNX Touch 7000















































































Отзывы:

Нет отзывов