Honeywell LYNX Touch 7000 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 78

Honeywell LYNX Touch 7000 Скачать руководство пользователя страница 27

27

74-2760—1

What You Do

What You See

What Happens

View the user
keypad

The disarmed mode is
displayed.

Press

The Mode menu displays.

Press

repeatedly to
display more menu
selections until the
desired special
protection modes
are displayed

The Mode Menu displays.

Press

•

Special protection for the
home office is turned off.

•

OPEN OFFICE is
momentarily displayed on
the user keypad for
10 seconds. Then the
name of the previously
selected security mode
returns to the display.

•

The LED next to the UP
arrow comes on.

•

All other security points
remain unaffected by
this change.

Press

and then

•

Special protection for the
home office is turned on.

•

CLOSE OFFICE
momentarily displays on
the user keypad for
10 seconds. Then the
name of the previously
selected security mode
returns to the display.

•

The LED next to the UP
arrow goes off.

•

All other security points
remain unaffected by
this change.

The following is an example of turning on and off a special protection point:

As a system option, you can have up to four special protection points, each with an
armed and disarmed mode. These are set up at the time your system is installed or
can be added at a later date.

THE SMITH'S

M6942

1– AWAY ALL ON
2– AWAY PARTIAL

M6943

9– OPEN OFFICE
10– CLOSE OFFICE

M6957

OPEN OFFICE

M6958

CLOSE OFFICE

M6959

«
...
25
26
27
28
29
...
»

Содержание LYNX Touch 7000















































































Отзывы:

Нет отзывов