Honeywell HS-600 Скачать руководство пользователя страница 93

Страница: 93 / 107

SYSTEM DESCRIPTION AND INSTALLATION MANUAL

HS--600 High Speed Data System

23--20--31

30 May 2002

Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.

Page A--7

Table A--1. Call Cause Code List

(cont)

Cause Code

Note

Description

15CC

Aeronautical Class MES only: (Spot Beam Handover): LES is terminating the procedure

because it did not receive a response to the Handover Request from the NCS.

15CD

(Spot Beam Handover): LES is clearing the call session in the next beam because the MES

did not indicate that it was ready to make the transition (possibly because the MES did not

receive the Channel Assignment).

15D1

LES is rejecting the call because the “Channel Assignment” message received from the

NCS contains inappropriate or conflicting information.

15D2

LES is clearing this MES ID and channel number in the busy lists at LES and NCS because

a new call to/from this MES is being set--up (and thus any previous call to/from

this

MES

cleared).

15E1

Call Cleared, MES still Transmitting Fault
LES is attempting to clear an MES which has sent an SCPC channel release message but

is found still to be transmitting 5.12 sec later.

1651

Call Failed, LES Congested, No Channel Unit
LES is rejecting the call because an appropriate channel unit is not currently available at

this specific LES.

1661

Call Failed, Long Interruption in Reception
LES is clearing the call because of an interruption in reception of the MES carrier exceeding

the allowed time limit of 62 seconds.

16C1

LES clear: SEST carrier not received.

16C2

LES is clearing the call because an appropriate SCPC MES carrier has not been received

by the LES (at the commencement of the call) within the allowed time limit.

16C3

(Spot Beam Handover): LES is clearing the call session in the next beam because the LES did

not detect the MESH carrier on the new frequency

1790

LES is clearing the call because of a malfunction in the credit card validity checking

database or in the communications links.

1791

LES is clearing the call because of a malfunction in the authentication checking database or

in the communication links.

1811

NCS is rejecting the call because the specified MES ID is in the “S busy” list at the NCS.

1812

NCS is rejecting the call because the specified MES is busy with an IPDS call at the NCS.

1841

NCS is pre--empting the call in order to free the MES for an incoming call with priority 1.

1842

NCS is pre--empting the call in order to free the MES for an incoming call with priority 2.

1843

NCS is pre--empting the call in order to free the MES for an incoming call with priority 3.

1844

NCS is pre--empting the call in order to assign the channel to another call with higher priority.

1851

NCS is rejecting the call because an appropriate SCPC channel is not currently available.

1., 7., 8.

1852

NCS is rejecting the call because no SCPC channel exists at the NCS which matches the

contents of the Channel Parameters, Service Nature, Service Type, MES Category, Spot Beam

ID and Priority fields contained in the Request for Channel Assignment.

1., 9.,

10., 11.,

12.

Содержание HS-600












































































































Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды

Honeywell HS-600, Описание и руководство по установке

Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды