Honeywell HS-600 Скачать руководство пользователя страница 90

Страница: 90 / 107

SYSTEM DESCRIPTION AND INSTALLATION MANUAL

HS--600 High Speed Data System

23--20--31

30 May 2002

Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.

Page A--4

Table A--1. Call Cause Code List

(cont)

Cause Code

Note

Description

12C1

Call Faded, No Scrambling Vector Ack
MES clear: Scrambling Vector Ack (95) not received by the MES.

12C2

MES is clearing the call because a “Credit Card Valid” message (type A7) has not been

received by the MES within the allowed time limit.

12C3

Call Failed, MES Timeout, No Terrestrial Answer
MES is clearing the call because an “LES Connect” message (type 8C) has not been

received by the MES within the allowed time limit.

12C4

MES is clearing the call because the “authentication query” ISU message (type B4) and/or the

“authentication query” SSU message (type B5) have not been received by the MES within the

allowed time limit.

1., 2.,

13., 14.,

15.

12C5

MES is clearing the call because an expected supplementary services SU(s) has (have) not

been received by the MES within the allowed time limit.

12C6

MES is clearing the call because the “supplementary services interrogation” ISU (type B2H),

and/or ”subscriber digits” SSU (type AD H) messages have not been received by the MES

within the allowed time limit.

12C7

MES is clearing the call because a “SCPC channel release” SU (type 8AH) has not been

received by the MES, in response to the transmission of a “notification acknowledge”

message (type BAH) during the supplementary services call diversion information retrieval

process, within the allowed time limit.

12C8

(Spot Beam Handover): MES is clearing the call session in the next beam because the MES

did not detect the LESH carrier on the new frequency.

12D1

Call Failed, Spot Beam Data Invalid
LES is rejecting the call because the “spot beam ID” information received from the MES is

invalid, i.e., ID is not allocated on the satellite in use.

12D2

Call Failed, Invalid Scrambling Vector (LES is clearing the call because the “Scrambling

Vector” information received from the the MES is invalid; i.e., 0000 H, 6959 H or 7 FFF H).

1351

MES is clearing the call because the MES currently has insufficient free memory in which to

store the short message.

1361

Call Cleared by MES; Cable Unwrap
MES is clearing the call because the above--decks equipment is about to “cable unwrap”.

1362

Call Cleared, Long Interruption Reception
MES is clearing the call because a long--term interruption (16 sec) in reception of LES

carrier has occurred. The definition of a “long--term interruption” depends upon the service

type.

1., 3.

1363

Call Cleared, MES Antenna Repointed

(WS clear: switching ocean regions)
A secondary functional center of Multi--channel MES is clearing the call because the

primary functional center has commanded the above--decks equipment to repoint to a

different ocean region.

Содержание HS-600












































































































Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды

Honeywell HS-600, Описание и руководство по установке

Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды