Honeywell HS-600 Скачать руководство пользователя страница 89

Страница: 89 / 107

SYSTEM DESCRIPTION AND INSTALLATION MANUAL

HS--600 High Speed Data System

23--20--31

30 May 2002

Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.

Page A--3

Table A--1. Call Cause Code List

(cont)

Cause Code

Note

Description

11D2

Call Failed, Insufficient Digits in Service Address
LES is clearing the call because the “Service Address” information received from the MES is

invalid (e.g., less than 2 digits). If the customer is dialing a valid phone number or prefix

code, verify that the MES has a corresponding Inmarsat mobile number (IMN)s in the LES

access control and signalling equipment (ACSE) database.

11D3

Call Failed, Invalid Service Address
LES is clearing the call because the “Service Address” information received from the MES is

a 2--digit address which is either undefined or which is currently unavailable at this LES.

11D4

LES is clearing the call because the “credit card data” information received from the MES is

invalid. (This does not imply that the credit card itself is invalid.)

11D5

LES is clearing the call because the “Service Address” information received from the MES

contains a country code which is regarded (by this LES) as invalid.

11D6

LES is clearing the call because the “PID” information received from the MES in the

“scrambling vector” message (type 8D) is not consistent with the personal identification

number (PID) information in the fixed/MES--originated (PID) and PID/MES Registration

Tables at the LES as it relates to this call.

11D7

LES is failing the call because the service requested by the MES in the distress, urgency or

safety access request is not 4.8 kbps AMBE telephony.

11D8

LES is clearing the call because the service address received from the MES requesting

distress, urgency or safety priority is not a two or three--digit code.

11E0

LES is clearing the call because the credit card PIN received from the MES is not

considered (at this LES) to be valid.

11E1

LES is clearing the call because it has been determined that an excessive number of

consecutive call attempts with invalid credit card have been made.

1201

MES ack: received a simplex call.

1202

(Spot Beam Handover): MES is ready to make the transition from the current beam to the

next beam.

1261

MES ack: received a simplex call (unstable).

1262

Call Cleared, MES Timeout Distress Test
MES clear: distress test call has not been cleared in 120s.

1281

Call Failed, MES Cannot Accept
MES is rejecting the call because the MES is not equipped to provide the specified service.

1291

Call Failed, MES Cannot Accept at Present
MES is rejecting the call because although it is equipped to provide the specified service, it

is not currently able to do so.

12B1

Call Cleared by MES for Unspecified Reason
MES is rejecting or clearing the call for a reason which is not covered by any of the currently

defined “Cause” events.

Содержание HS-600












































































































Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды

Honeywell HS-600, Описание и руководство по установке

Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды