Honeywell HS-600 Скачать руководство пользователя страница 91

Страница: 91 / 107

SYSTEM DESCRIPTION AND INSTALLATION MANUAL

HS--600 High Speed Data System

23--20--31

30 May 2002

Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.

Page A--5

Table A--1. Call Cause Code List

(cont)

Cause Code

Note

Description

1391

Aero Class MES only: MES is clearing the call because the call has lasted more than 700

km in linear travelled distance.

1392

Aeronautical Class MES only: MES is clearing the call because it has moved out of spot

beam coverage.

1393

Aeronautical Class MES only: MES in “cooperative mode” is clearing the call because of a

preemption request from the master entity. Call cleared by MES due to reported antenna

gain falling below the antenna gain threshold setting (Maintenance parameter #6) for more

than 10 seconds.

1393

Call cleared by the MES due to the reported antenna gain falling below the antenna gain

threshold setting (maintenance parameter #6).

1451

Call Failed, Terrestrial Circuits Congested
LES is rejecting the call because an appropriate terrestrial circuit is not currently available at

this specific LES.

1452

Call Failed, LES Congested
LES is rejecting the call because an appropriate channel unit and associated terrestrial

circuit are currently not available at this LES.

1502

(Spot Beam Handover): LES is ready to make the transition from the current beam to the

next beam and is clearing the call session in the current beam (normal clear).

1541

Call Cleared, pre--empted at LES. (LES clear: pre--empted by higher priority call.)

1551

Call Failed, LES Congested, No Channel
LES is rejecting the call because an appropriate satellite channel is not currently available at

this specific LES.

1552

LES reject: appropriate time division multiplex (TDM)/time division multiple access (TDMA)

time slot not available.

1581

Call Failed, Service Not Provided at this LES
LES is rejecting the call because the requested service is not provided by this specific LES.

1591

LES is rejecting the call because the requested service is temporarily not available at this

specific LES.

1592

LES is clearing the call because the specified credit card type is not currently supported by

this specific LES.

15A1

LES is rejecting the call because the specified MES is not authorized for any service

(except Distress) at this specific LES. For a COMSAT LES, the phone is technically barred.

For other LESs, the phone is either financially or technically barred.
If the customer’s ISP or AA are authorized through this LES, verify that the MES ID has

corresponding IMNs in the LES ACSE database.
If the call setup proceeds to the point where the ACSE passes the call to the switch, check

to see 1) if the area code is invalid, 2) if a valid area code is missing in the switch, 3)check

to see if the ACSE passes the correct ICD message including the IMN (not all 9’s) to the

switch.

1., 4.

15A2

LES is rejecting the call because the specified MES is not authorized to use specific

requested service via this specific LES.

Содержание HS-600












































































































Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды

Honeywell HS-600, Описание и руководство по установке

Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды