Honeywell HS-600 Скачать руководство пользователя страница 88

Страница: 88 / 107

SYSTEM DESCRIPTION AND INSTALLATION MANUAL

HS--600 High Speed Data System

23--20--31

30 May 2002

Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.

Page A--2

Table A--1. Call Cause Code List

(cont)

Cause Code

Note

Description

1012

MES is clearing the fixed--originated call because subsequent to the acceptance of the call

and signaling of the identity of the mobile terminal to which the call will actually be routed,

that terminal has become busy and therefore cannot be rung.

1021

Call Failed, MES Time--out, No Answer
MES is clearing the call because appropriate “off--hook” signaling has not been received

from the addressed MES terminal (including any authorized diversions) within the allowed

time limit.

1081

Call Failed, MES Terminal # Not Installed
MES is rejecting the call because the specified MES terminal number has not been

installed, and MES has not been authorized to divert calls which are addressed to that

number.

1091

Call Failed, MES Terminal # out of Service
MES is rejecting the call because the specified MES terminal number is currently out of

service, and MES has not been authorized to divert calls which are addressed to that

number.

1092

MES is clearing the fixed--originated call because subsequent to the acceptance of the call

and the signaling of the identity of the mobile terminal to which the call will actually be

routed, that terminal has become out--of--service and therefore cannot be rung.

1141

Call Cleared, pre--empted at MES
MES clear: pre--emption for higher priority call.

1142

Call Refused due to Distress Call from MES
MES clear: (Fixed) MES has initiated a distress call.

1143

Call Cleared, pre--empted at MES
Fixed--originated call cleared by MES due to SATCOM reporting that it is no longer logged

on.

1144

Attempted Call pre--empted by MES Distress
MES clear: (mobile) MES has initiated a distress call.

1145

Call Cleared, pre--empted by MES
Mobile--originated call cleared by MES due to SATCOM reporting that it is no longer logged

on.

1146

Attempted Call Abandoned by MES Terminal
MES is prematurely clearing the mobile--originated call which is in the process of being

established because the MES user has abandoned the call (by placing, the originating

terminal “on--hook).

11A0

LES is clearing the call because the credit card being used is not valid (at this LES) for calls

to the country indicated in the “Service Address’ information received from the MES.

11D1

Call Failed, Request Data Invalid
LES is rejecting the call because the “Service Nature” and/or “Service Type” and/or

“Channel parameter” information received from the MES is invalid (e.g., not currently

defined in the SDM, mutually contradictory, or not applicable to a MES--originated call.)

Содержание HS-600












































































































Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды

Honeywell HS-600, Описание и руководство по установке

Результаты поиска

Содержание HS-600

Отзывы:

Похожие инструкции для HS-600

Бренды по названию

Популярные бренды