Honeywell ACUIX, Руководство пользователя

Страница: 85 / 148

ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 85
02/08
Note If password protection is enabled on the ACUIX, you must log into the ACUIX
with a supervisory password.
When using Diamond protocol, the following keys are used to navigate within the on-screen
menus:
• Use the direction arrow keys, F1 (
▲
) F2 (
▼
) F3 (
!
) F4 (
"
), to maneuver through the
menus, along with pressing the corresponding number on the keyboard to enter
sub-menus.
• Once in the setup menu, the Camera and Press buttons can be used to toggle
through available characters and pressing Aux sends the selected character to the
dome.
• Pressing the Counter key jumps the selection between upper case and lower case
letters. If a symbol character is being displayed when the Counter key is pressed, the
selection jumps to a lower case a.
• Press and hold fn then press Counter to jump to symbol characters when letter
characters are being displayed.
• Press monitor to send BACKSPACE to the dome to delete the previous character.
• Press and hold fn then press monitor to send the space character, which is also
available between Z and a.
• Press wash to send INSERT to the dome to insert a line.
• Press wipe to send DELETE to the dome to delete a line.
• Press F5 (enter) to send ENTER to the ACUIX dome menu.
• Press F6 (menu) to send ESC to the ACUIX dome menu.
• Press sequence to send S to the ACUIX dome for saving settings.
• Press Aux in list menus to display the next page of items.
• Press lock to exit OSD and LCD menus and return the dome and keyboard to normal
operation.
• The keyboard also shuts down the menus if there has been no keyboard activity for
over one minute.
Honeywell VCL Protocol
HJZTP Joystick Controller
When using the ACUIX dome in Honeywell VCL mode, the HJZTP controller is
recommended. Perform the following procedure to access the ACUIX on-screen setup
menus:
1. A user must be logged in as User Level 1 on the controller to access the ACUIX
on-screen menus.
2. Access the ACUIX dome menu by pressing and holding Lock, followed by F6 (Menu).