Honeywell ACUIX, Руководство пользователя

Страница: 59 / 148

ACUIX High Speed Dome User Manual
Document 800-01023 Rev A 59
02/08
Sector IDs
When using an HJZTP controller the Sector IDs must be programmed using the
on-screen setup menu.
1. Press and hold Lock, then press F6 (menu).
2. Use the joystick or the Camera and Preset keys to scroll to SECT then press Aux to
enter the HJZTP sector menu.
3. Use the joystick or the Camera and Preset keys to select PROGRAM then press Aux
to enter the ACUIX Program Sector Menu.
4. Enter Sector number and press F5 (enter).
5. Enter the Sector title by pressing Camera and Preset to scroll through the
characters and then pressing Aux to enter each character. Use the HJZTP numeric
keypad to enter numbers. Press F5'(enter) when done.
6. Scroll to the S by pressing Camera and Preset then pressing Aux to enter the S.
7. Use the HJZTP joystick to center the picture on the lower right corner of the sector
and press F5 (enter).
8. Use the joystick to center the picture on the upper right corner of the sector and
press F5 (enter).
9. Return to step 4 to program another sector or press Lock to exit the sector program
menu.
Note For more information on using the HJZTP controller with the ACUIX on-screen
menu, see
HJZTP Joystick Controller , page 84 and the HJZTP/HJZTP User
Manual (900.0570).
Privacy Zones
When using an HJZTP controller, Privacy Zones must be programmed using the
on-screen setup menu.
Note Upon powering up, the ACUIX dome automatically finds home so the dome
can then run Presets and so on as they were programmed. If a Privacy Zone
is enabled, no video will be shown during homing, as your Privacy Zones are
not recognized until ACUIX has reached home. Video displays once the dome
has reached its home setting, unless a Privacy Zone overlaps with the home
setting.
1. Press and hold Lock, then press F6 (menu).
2. Use the joystick or the Camera and Preset keys to scroll to SECT then press Aux to
enter the HJZTP Sector menu.