manualshive.com logo in svg

Honeywell ACUIX, Руководство пользователя, Страница: 115 / 148

Поделиться
Скачать
Honeywell ACUIX Скачать руководство пользователя страница 115

ACUIX High Speed Dome User Manual

Document 800-01023 Rev A

115 

02/08

Image Stabilization

1.

Select 8 to toggle the Image 
Stabilization feature ON or OFF 
(default). If you select ON, the motion 
detection feature is disabled.

a.

Select 

5Hz

 or 

10Hz

 to turn Image 

Stabilization on. 

b.

Select 

OFF

 to turn Image 

Stabilization off.

Note

Selecting OFF disables motion detection.

2.

Press ESC to return to the Camera Options menu and leave Image Stabilization off.

When Electronic Image Stabilization (EIS) is enabled, the camera reduces the area of the 
CCD that is scanned. This causes the video displayed on the monitor to appear to have 
zoomed in. When the dome undergoes a pan or tilt operation, electronic Image 
Stabilization is disabled while the camera moves, and then re-enables after the camera 
has stopped moving for a five second period.

Note

When Image Stabilization is enabled, the Digital Zoom is limited to 2x.

Motion Detection

1.

Select 9 to turn Motion Detection ON 
or OFF (disabled). If Motion Detection 
is ON, Interlace Scanning and Image 
Stabilization are automatically 
disabled. If Motion Detection is 
enabled, the default function is also 
disabled.

Note

If Motion Detection is enabled and an operator sends a command to the 
ACUIX, Motion Detection is automatically disabled and the operator must 
access the setup menu to re-enable it.

This will Disable

Motion Detection.

Are you sure that you

want to do this?

-Y/N-

ESC to Exit

  This will Disable

  Interlace Scanning

  and Image Stabilization.

   Are you sure that you

      want to do this?

   -Y/N-

  PTZ will disable this option.

   ESC to Exit

Содержание ACUIX





















































































































































Отзывы:

Нет отзывов