Chapter 8 High-speed Link
12
Pnet I/F Module 2MLL-PSRA, 2MLL-PMEA, 2MLL-PMEB User
’s Guide R220
Honeywell
January 2019
8.5.1 Monitor of High-speed link information
High-speed link information can be checked through the variable monitor on the monitor menu after
SoftMaster is Online connected, or through the SoftMaster diagnosis service.
1) Variable monitor
Variable monitor is a function used to select an item only necessary to monitor by means of
SoftMaster
’s flag monitor function. Select [View] [Variable Monitor Window] to display the
variable register screen as shown on [Fig. 7.9] , and there select [Flag] directly to select and
register High-speed link information flag one by one on the screen of the variable flags list. At
this time, since _HSxSTATE[n], _HSxERR[n], _HSxMOD[n] and _HSxTRX[n] are the flags of
array type, the user needs directly to select the array numbers which stand for the register
numbers inside the parameters.
2) High-speed link monitor from the SoftMaster diagnosis services
(1) Select SoftMaster
’s “Online”
“Communication module setting”
“System Diagnosis.”
Click the right mouse button with the cursor positioned on the applicable module
[Figure 8.5.2] System Diagnosis
Item
Details
Communication module information
Displays the information of communication module
High Speed Link
Displays the information of high speed link
Auto scan
Displays the information of the slave configuration
[Table 8.5.2] System diagnosis