Honda TRX400EX FOURTRAX 1999, Руководство по обслуживанию

Страница: 203 / 263

HYDRAULIC DISC BRAKE
BRAKE FLUID REPLACEMENT/
AIR BLEEDING
A
contaminated brake disc or pad reduces stopping
power. Discard contaminated pads and clean a cont-
aminated disc with a high quality brake degreasing
agent.
CAUTION
Do
not allow foreign material t o enter the system
when filling the reservoir.
Avoid spilling fluid on painted, plastic or rubber
parts. Place a rag over these parts whenever the
system is serviced.
Use onlv
DOT
4 brake fluid from a sealed container.
Do
not mix different types
of fluid. They are not
compatible.
BRAKE FLUID DRAINING
Remove the reservoir cap, set plate and diaphragm
(page 3-14 for front, page 3-15 for rear).
- -
Connect the bleed tube to the bleed valve.
Loosen the bleed valve and pump the brake lever or
pedal until no more fluid flows out of the bleed valve.
.
.
BRAKE FLUID
Close the bleed valve.
Fill the reservoir with
DOT 4 brake fluid from a sealed
container.
Connect a commercially available brake bleeder to
the bleed valve.
Pumo the brake bleeder and loosen the bleed valve.
Add brake fluid when the fluid level in the reservoir i s
NOTE:
Check the fluid level often while bleeding the
brake to prevent air from being pumped into the
system.
When using
a
brake bleeding tool, follow the man.
ufacturer's instructions.
I
14-3