Honda TRX400EX FOURTRAX 1999, Руководство по обслуживанию

Страница: 105 / 263

CYLINDER
The crankshaft
should be turned
only counter-
clockwise. This
must be done to
prevent the one-
way
sor system func-
tioning.
Install the cam sprocket onto the cam chain so that
the index lines on the sprocket with the upper surface
of the cylinder head.
Install the camshaft onto the cylinder head through
cam sprocket.
Install the cam sprocket onto the camshaft flange
securely.
Make sure that the index lines on the cam sprocket
with the upper surface of the cylinder head when the
"T"
mark on the flywheel is aligned with the index
notch in the left crankcase cover.
I
Apply locking agent to the cam sprocket bolt threads.
A l i g n t h e b o l t holes i n t h e cam sprocket and
camshaft flange and install the cam sprocket bolt.
Turn the crankshaft counterclockwise one turn and
install the remaining cam sprocket bolt.
Tighten the INDEX LINE side bolt first.
TORQUE:
20 14
Turn the crankshaft counterclockwise one turn and
tighten the other cam sprocket bolt t o the same
toque.
(when aligning
CAM CHAIN
INSTALLATION
Remove the cam chain tensioner lifter plug and
ring.
Check the lifter operation:
- The shaft should not go into the body
when it is pushed.
- When it is turned with
a screwdriver, the
tensioner shaft should be pulled into the body.
The shaft springs out
of
the body as soon
as the
screwdriver is released.
9