Honda Magna VF750C, Руководство по обслуживанию

Страница: 154 / 306

NOTE
•
Always replace the oil sea ls with new ones.
Front Wheel/Suspension/Steering
•
Coat the new oil sea l with the recommended fork oil and insta l l it with its mark facing up.
•
After assem bling the fork legs, insta l l each fork leg i nto the lower fork bridge fi rst, then torque the fork cap.
Requisite Service
•
Fork disassem bly (page 1 2-8)
Procedure
Assembly Order
( 1 ) Rebound spring
(2) Fork piston ri ng
(3) Fork piston assembly
(4) O i l lock piece
(5) Fork tube bushing
(6) Fork tube
(7) Sea l i n g washer
(8) Fork socket bolt
(9) Slider bushing
( 1 0) Back u p ring
( 1 1 ) O i l seal
( 1 2) Stopper ring
( 1 3) Dust sea l
( 1 4) Fork spring
( 1 5) Spring seat
( 1 6) Spacer
( 1 7 ) 0-ring
( 1 8) Fork cap
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
•
Fork instal lation ( page 1 2-6)
Remarks
Replace with a new one if it was removed from the piston.
I nsert into the fork tube.
Insert onto the piston.
Replace with a new one if it was removed from the fork
tube.
If the socket bolt turns with the fork piston, tem porarily
i nsta l l the fork spring, spacer and fork cap, then tighten
the socket bolt.
•
Wrap vinyl ta pe arou nd the fork tube top end to avoid
damaging the oil seal d u ring i nsta llation.
•
Use fork seal d river (07947 - KA501 00) and attachment
(07947 - KF001 00) for fork seal insta l l ation.
After insta l ling, compress the fork tu be fu l ly and pour the
specified amount of fork fl uid (page 1 - 1 0) i nto the fork
tube.
Wipe all oil off the spring thoroughly using a clea n , l i nt
free cloth and insta l l with the ta pered end facing down .
Apply oil to the new 0-ring.
CAUTION
•
Be careful not to cross-thread the fork cap.
•
Screw in the cap, but do not tighten yet.
1 2- 1 1