Honda FG110, Руководство пользователя

Страница: 15 / 81

Date of Issue: February, 2005
2-8
© American Honda Motor Co., Inc.
FG110
b. HARD STARTING
Check the fuel level. Refuel.
No fuel in the tank
Check whether fuel is reaching the
carburetor by pressing the priming bulb.
Remove the spark plug and check for
wet or fouled electrode.
Install the spark plug on the plug cap
and ground the electrode. Pull the recoil
starter and check for sparks
(P. 2-11) .
Install a compression gauge in the plug
hole. Pull the recoil starter several
times to check the cylinder
compression
(P. 2-11) .
Install the spark plug and start the
engine according to the starting
procedure.
• Check for correct valve clearance
(P. 3-7) .
• Check for defective valves (P. 9-5) .
• Check for worn piston, piston rings,
or cylinder (P. 9-6) .
• Check for blockage of the fuel line
or filter (P. 3-9) .
• Check for line blockage and for stiff
carburetor diaphragm or worn
valve
(P. 4-3) .
Disassemble the carburetor and
check for blockage of the nozzle, etc.
(P. 4-3) .
• Replace the spark plug with a new
one and check for spark.
• Check for leaking current caused
by damaged high tension cord
insulation.
• Check the ignition coil (P. 7-2) .
Check to see whether excessive
carbon has accumulated in the
combustion chamber.
Reaching the carburetor
Wet
Good spark
Adequate cylinder
compression
Sufficient fuel
Not reaching the
carburetor
Dry
No spark or
weak spark
High cylinder
compression
Low cylinder
compression