Honda FG110, Руководство пользователя

Страница: 72 / 81

Date of Issue: February, 2005
© American Honda Motor Co., Inc.
10-3
FG110
b. TINE REMOVAL
1. Remove the left and right tine shaft lock pins and pull them
out.
2. Clean the tine shaft ends and remove the tines.
c. TINE INSTALLATION
1. Clean the tine shaft and tine hubs of any foreign material.
The tines should easily slide onto the tine shaft in the
order shown in the diagram above. Do not force the tines
onto the shaft.
2. Install the lock pins through the tine shaft round side
hole (a), then rotate the pin (b) to lock the pin in place.
d. NARROW CULTIVATING
1. Remove the two outer tines by pulling the lock pins out of
the holes in the end of the tine shaft.
2. Slide the outside tine set off the tine shaft.
3. Secure the inner set of tines onto the tine shaft by placing
the lock pins in the inside set of lock pin holes.
(a)
(b)