Honda FG110, Руководство пользователя

Страница: 59 / 81

Date of Issue: February, 2005
9-4
© American Honda Motor Co., Inc.
FG110
c. CRANKSHAFT REASSEMBLY
1. Install the timing belt on the crankshaft timing gear. Pay
attention to the direction of the letters on the timing belt, as
shown in the diagram.
Replace a worn or cracked timing belt. Do not bend or twist
the timing belt.
2. Install the crankshaft in the cylinder block.
3. Apply a bead of liquid gasket to the cylinder block,
specifically to the mating surface of the crankcase cover.
4. Install the crankcase cover on the cylinder block (P. 8-6) .
5. Install the cam pulley and timing belt in the cylinder
block (P. 8-2) .
d. 10 x 20 x 5 mm OIL SEAL ASSEMBLY
1. Set the oil seal on the crankshaft.
2. Install by aligning the oil seal projection with the groove in
the cylinder block.
3. Install the lower crankcase (P. 8-6) .
CYLINDER
BLOCK
CAM PULLEY
TIMING BELT
PISTON
CRANKSHAFT
10 x 20 x 5 mm
OIL SEAL
CRANK
SHAFT
PROJECTION
GROOVE
CYLINDER
BLOCK