Date of Issue: February, 2005
11-2
© American Honda Motor Co., Inc.
FG110
2. DISASSEMBLY
a. REMOVE THE GRASS GUARDS
Remove the grass guard(s) only if you need to replace the oil
seal(s).
1. Using pliers or similar tools, pry one grass guard off the
transmission housing, as shown in the diagram.
2. Using the same technique, pry the grass guard from the
other side of the transmission.
b. SEPARATE THE TRANSMISSION HALVES
1. Remove the eleven 6 x 23 mm flange bolts.
2. Place a screwdriver or similar tool in each of the two
recesses between the transmission halves.
3. Pry the transmission halves apart.
c. REMOVE THE OUTER CLUTCH
1. Remove the driveshaft from the transmission.
2. Hold the worm gear firmly in one hand.
3. Loosen and remove the outer clutch from the worm gear
assembly.
4. Slide the driveshaft bushing, washer, and bearings off the
worm gear.
d. REMOVE THE TINE SHAFT
1. Slide the tine shaft out of the transmission case.
2. Use a press to remove the driven gear from the tine shaft.
Содержание FG110
Страница 3: ...Date of Issue February 2005 American Honda Motor Co Inc...
Страница 7: ...Date of Issue February 2005 1 4 American Honda Motor Co Inc FG110 NOTES...
Страница 35: ...Date of Issue February 2005 4 6 American Honda Motor Co Inc FG110 NOTES...
Страница 79: ...Date of Issue February 2005 11 4 American Honda Motor Co Inc FG110...
