Honda FG110, Руководство пользователя

Страница: 21 / 81

Date of Issue: February, 2005
3-2
© American Honda Motor Co., Inc.
FG110
2. ENGINE OIL
Level Check
Check the engine oil level before each use, or every 10 hours
if operated continuously. Rest the tiller on a level surface, with
the engine stopped and in an upright position.
1. Tip the tiller on its carry handlebar as shown.
2. Remove the oil filler cap/dipstick and wipe it clean.
3. Insert and remove the dipstick without screwing it into
the filler opening . Check the oil level shown on the
dipstick.
4. If the oil level is low, fill to the edge of the oil filler hole with
the recommended oil (see P. 3-3 ). To avoid over-filling or
under-filling, be sure the engine is in a level position, as
shown.
NOTICE
Running the engine with too little or too much oil can cause
engine damage.
5. Screw in the oil filler cap/dipstick securely.
Oil Change
Drain the used oil while the engine is warm. Warm oil drains
quickly and completely.
1. Place a suitable container below the engine to catch the
used oil.
2. Remove the oil filler cap/dipstick.
3. Tip the tiller to drain the used oil through the oil filler
opening. Allow the used oil to drain completely.
Please dispose of used motor oil in a manner that is
compatible with the environment. We suggest you take
used oil in a sealed container to your local recycling center
or service station for reclamation. Do not throw it in the
trash, pour it on the ground or down a drain.
4. With the engine resting on the carrying handlebar on a
level surface, fill to the edge of the oil filler hole with the
recommended oil (see
P. 3-3
). Do not overfill.
5. Screw in the filler cap/dipstick securely.
Engine oil capacity 80 cc (2.7 US oz, 2.8 Imp oz)
Recommended
operating ambient
temperature
-5°C ~ 40°C (23°F ~ 104°F)
OIL FILLER
HOLE
OIL FILLER
CAP/DIPSTICK
CARRYING
HANDLEBAR
OIL LEVEL