Honda CBR125R, Руководство пользователя

Страница: 77 / 430

MAINTENANCE
3-21
BRAKE FLUID
Spilled fluid can damage painted, plastic or rubber
parts. Place a rag over these parts whenever the
system is serviced.
• Do not mix different types of fluid, as they are
not compatible with each other.
• Do not allow foreign material to enter the system
when filling the reservoir.
• When the fluid level is low, check the brake pads
for wear (page 3-22).
• A low fluid level may be due to wear of the brake
pads. If the brake pads are worn and caliper pis-
tons are pushed out, this accounts for a low fluid
level. If the brake pads are not worn and fluid
level is low, check the entire system for leaks
(page 3-23).
FRONT BRAKE
Turn the handlebar so that the reservoir is level and
check the front brake fluid level through the sight
glass.
Remove the cover screws, reservoir cover, set plate
and diaphragm.
Add the reservoir with DOT 3 or DOT 4 brake fluid
from a sealed container to the casting ledge.
Install the diaphragm, set plate and reservoir cover.
Install and tighten the cover screws to the specified
torque.
"LOWER" LEVEL LINE
COVER
SET PLATE
DIAPHRAGM
SCREWS
TORQUE: 1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
CASTING LEDGE